Safety shoes are commonly called labor insurance shoes, and the safety shoes generally refer to anti-smash shoes and steel shoes. Strictly speaking, safety shoes are divided into protective toe safety shoes, anti-static safety shoes, electric insulation safety shoes, high temperature safety shoes, etc., but the most commonly used safety shoes are toe protection safety shoes, that is, flood control. Shoes, because the front of the anti-smashing shoes generally has a steel toe cap, so it is also commonly known as steel-toed shoes. The maintenance of safety shoes is basically the same as the maintenance of ordinary fashion shoes. Wipe frequently, keep it clean, and often use shoe polish to extend the life of the safety shoes.
Safety shoes use standard oil-proof shoes for use in areas where oil or splashing oil is used; waterproof shoes are used in workplaces where water or splashing water is used; and cold-proof shoes are used for foot protection of low-temperature workers to protect against frostbite. Anti-piercing shoes are used for foot protection to prevent stab wounds from various sharp objects. The main function of the anti-smashing shoes is to prevent the falling objects from hurting the feet. The front head of the shoe has an impact resistant material. The main function of steelmaking shoes is to prevent burning and puncturing. It should be able to withstand a certain static pressure and withstand certain temperatures and is not flammable. These shoes are suitable for smelting, furnace, cast iron and so on. In addition to the above, there are some special shoe covers, such as canvas, asbestos, and aluminum film cover. Selection and maintenance of protective shoes The selection of protective shoes should be based on the nature of the work environment and the degree of hazard. Protective shoes should have a product certificate and product specifications. Read the instructions according to the conditions used before use, and the method should be correct.
Special protective shoes should be inspected and kept clean after use and stored in a non-polluting and dry place.
Selection and use of protective footwear
(1) In addition to the appropriate type of protective footwear, it is important to fit the foot and make it comfortable to wear. It is important to carefully select the appropriate shoe size.
(2) Protective shoes should have a non-slip design, not only to protect people's feet from injury, but also to prevent accidents caused by the operator being slipped.
(3) All kinds of protective shoes with different performances must meet the technical indicators of their respective protective performance, such as the toes are not bruised, the soles of the feet are not stabbed, and the insulation is required. But safety shoes are not omnipotent.
(4) Careful inspection or testing should be carried out before using protective shoes. In electrical and acid-base operations, damaged and cracked protective shoes are dangerous.
(5) Protective shoes should be properly kept after use. Rubber shoes should be rinsed with water or disinfectant and dried to extend the service life.