1.Check before use
Before using the combat boot, you should first check the appearance, check whether the boot is matched with the type of the combat boots, check whether the boot is damaged, and whether the strap is damaged.
2.Wear
Put the combat boots on the outer part of the conventional combat boots. The boots of the combat boots are placed between the inner and outer trousers of the anti-virus suit, and the boot sleeves are fastened, and then the trousers of the anti-virus outer pants are bound.
3.Work
Personnel in NBC-contaminated environments should always wear combat boots and other personal protective equipment. Warning: Combat boots are limited to use equipment. After use in a toxic environment, they must be thoroughly washed before they can be used again. Check the integrity of the boots before each use.
Note: When the CBRN boot is used in training or practical operation area, if the boot sleeve is loose, it should be adjusted with anti-virus gloves.
Note: When wearing the boots, avoid touching sharp objects as much as possible to prevent the CBRN boot from being punctured.
4.Detachment
After the CBRN boots are used in the poisonous operation area, they must be removed by washing (washing or scrubbing) before being removed; the anti-virus suit must be taken out first; the boots must be removed with anti-virus gloves.
5.Decontamination
The CBRN boot sleeves used in the toxic environment must be treated collectively after being easily removed. Soak in 3%~5% sodium hypochlorite solution for more than 24 hours or boil for 1h with 1% sodium hypochlorite solution, then rinse with water and dry. The decontamination process will accelerate the aging of the boot. The next time you use it, you must carefully check the integrity of the boot. If the rubber surface of the boot has a slight crack, give it up.