The labor safety supervision department shall conduct the handover test for the purchase of new insulation shoes. After the product has been worn for 6 months, a preventive test should be carried out. For the defective product pierced by the sharp device, it should not be used as an insulated shoe.
Preventive test, for 6KV leather insulated shoes, 5KV voltage detection should be used. 5KV cloth shoes use 3.5KV testing. Implementing the new GB12011-2000 standard is the common responsibility of product manufacturers and users. Only by implementing the standards and grasping the requirements of the standards can the safety accidents caused by electric shocks be reduced. The new standard of GB12011-2000 electric insulation shoes is beneficial to manufacturers to improve product quality, is conducive to enterprise safety and production management, and improves the safety management level and safe operation level of enterprises to prevent electric shock accidents.
The work of wearing insulated boots must strictly comply with the relevant regulations of the electrical safety regulations. In use, avoid contact with sharps, high temperature and corrosive substances to prevent them from being affected by damage. If the insulating boots are damaged, the bottom of the sole is smoothed, and the outer bottom grinding reveals the insulating layer, the insulation performance will be lost, and the wearer will not be protected from electric shock, and it can no longer be used as an insulating boot.
Https://www.safttofootwear.com