The management of labor insurance products should be very standard, some can be shared, but some must be dedicated.
Labor protection supplies management regulations
First, purpose
Standardize the management of labor protection articles and ensure that labor insurance products are safe and effective. Thereby effectively preventing work-related accidents and occupational diseases, and ensuring the safety and health of employees.
Second, responsibility
1. Treasury: Responsible for the custody and distribution of labor protection articles, and establish and distribute account books.
2. Quality, Safety and Environmental Protection Department: Responsible for the audit, supervision and management of labor protection products, and the development of new labor insurance products, and the safety performance of labor protection products.
3. Purchasing Department: Responsible for the procurement of labor protection products and the assessment of suppliers.
4. Use team: Unconditionally wear labor protection products, report on the use of labor protection products, maintenance management, and use feedback, and use the labor protection products to train and supervise the implementation.
Third, the concept of labor protection supplies
1 Labor protection articles refer to the protective equipment provided by employees in order to avoid or mitigate accidental injuries or occupational hazards during the labor process;
2 Labor protection products: general labor protection products (such as: safety helmets, safety shoes, overalls, masks, protective glasses, protective masks, gloves, etc.) and special labor protection products (such as: seat belts, gas masks, positive pressure breathing) Device, etc.).
Fourth, the purchase of labor protection supplies
1. The team leader of the department shall report the labor protection articles of the team according to the environment and conditions of the operation site of the team, and submit it to the Quality and Safety Department for review.
2. The Quality and Safety Department will review and summarize the labor protection articles of each team, and submit them to the Supply Department after approval;
3. The Supply Department is responsible for purchasing labor protection products according to plan, and strictly guarantees the quality. The purchased materials must meet the requirements; the labor protection products supplier must provide the product quality inspection certificate, the manufacturer's qualification certificate, safety appraisal certificate and special invoice.
Fifth, the storage of labor protection supplies
1 The warehouse shall check the production license, product inspection certificate, safety appraisal certificate, product name, quantity, and packaging of labor protection articles, and go through the formalities for storage;
2 The warehouse shall keep the labor protection articles in accordance with the storage and storage requirements of labor protection articles, and regularly check the storage conditions;
3 The warehouse shall have an emergency plan for the inventory of all labor protection articles. When the inventory is less than 20%, it shall be promptly submitted to the Quality, Safety and Environmental Protection Department.
Sixth, the distribution and use of labor protection articles
1 The warehouse shall establish a ledger as an archive of the original materials for the distribution of protective equipment.
2 Protective equipment should be used by individuals after issuing the "requisition list" according to the needs of the work.
3 Treasury must strictly manage labor protection supplies, etc. After the labor protection articles of the out-of-town construction team are returned to the warehouse, the warehouse must inform the quality, safety and environmental protection department for acceptance and scrapping.
Seventh, the use of labor protection products management
1 The person in charge of the department shall educate the employees of the department to use the labor protection articles in accordance with the regulations and protective requirements for labor protection articles. The quality and safety department shall conduct regular inspections and trainings to supervise the implementation;
2 Employees must use the labor protection articles correctly and reasonably according to the hazard factors and the degree of harm in the workplace. When entering the job, they should wear the labor protection articles that should be configured for the work, and do not wear and use the labor protection articles according to the regulations. , can not be on the job;
3 When using special labor protection articles, employees must strictly check their integrity before use;
4 The use of special labor protection articles must be strictly trained and evaluated.
Eighth, the retirement of labor protection supplies
1. Employees must cherish the labor protection articles, keep them in a safe place, and have no protective effect on labor protection articles, and they can be scrapped;
2. Special labor protection articles (such as seat belts, gas masks, etc.) must be reported to the Quality, Safety and Environmental Protection Department for approval and registration when they are to be disposed of;
3. The scrapping of labor protection articles must be based on the principle of no waste.
Ninth, penalty
1. The Quality, Safety and Environmental Protection Department supervises and inspects the use of labor protection articles in departments (workshops), and finds violations of regulations and timely conducts safety education or economic penalties;
2. When the labor protection articles fail to meet the scrapping conditions, they will be discarded and cause waste. The Ministry of Quality, Safety and Environmental Protection will impose penalties on the departments that waste labor protection products according to the price of labor protection articles.
Tenth, the types and names of protective equipment
Safety helmet; eye protection for welding (ink glasses, protective mask, etc.); protective shoes; protective gloves (welding gloves, cloth gloves, etc.); protective clothing (general overalls, etc.); fall protection (seat belt, safety rope) , protective net); life jacket; mask; gas mask;
Eleventh, the term of use of protective equipment.
1 Safety helmet: The national standard for normal use is three years. If the damage is not reached, the Quality, Safety and Environmental Protection Department shall verify the replacement.
2 Welding sunglasses and protective masks: Indefinite years, if it is damaged, it cannot be used by users. After confirmation, it will be replaced with old ones.
3 Protective boots: The staff of the base production department is to replace the safety boots or shoes for 6 months, and the construction team of the engineering department can replace the safety boots or shoes for 4 months;
4 Protective gloves (welding gloves, cloth, gauze gloves): welding gloves, indefinite years, confirmed damage, trade-in. Cloth and gauze gloves, issued two pairs each month, trade-in.
5 Work clothes: The employees of the production base each have two sets of summer and winter clothes. Those who have accumulated more than 2 months of construction work may receive one more set.
6 Fall protection protective gear: The safety belt is not more than 2 years, and all kinds of special labor insurance products are found to be damaged and replaced in time.
7. Mask: According to the needs of the post, the old ones are replaced.
8. The recycled protective articles should be piled up for disposal and should not cause environmental pollution.
9. The use of labor protection articles should pay attention to the correctness of its use and the monitoring of product quality. If problems are found, they should be analyzed in time with the quality and safety department and the supply department to find out the reasons and feedback to the supplier for correction.
Https://www.safttofootwear.com