At present, the requirements of precision manufacturing workshops are becoming more and more strict. In order to ensure the quality of products, it is necessary to strictly control the static electricity existing in the production plant. If static electricity is generated in the workshop, the precision instrument integrated circuit will be damaged. In addition, when there is more static electricity in the workshop, if the static electricity accumulation in the indoor air is not able to conduct underground, wearing a sweater or pulling a car will have the feeling of electric shock, and static electricity will also break through components such as IC, crystal, and triode. Therefore, anti-static safety shoes must be worn by personnel working in precision manufacturing workshops.
The specifications required for precision manufacturing plants are extremely high, and the corresponding workshop environment for these instruments is also high. For employees entering the precision instrument factory, safety shoes with anti-static function must be worn to reduce static electricity to precision instruments. Damage and reduce the damage of static electricity to the human body of the operator. Anti-static safety shoes are anti-static and conductive soles, safety shoes worn in a flammable and explosive working environment and in a workshop that requires clean, dust-free and sterile to reduce and eliminate static hazards.
Precision manufacturing workshop assembly workshop Heavy equipment in the assembly, disassembly, handling and transportation process, if the operator fails to work, there will be a situation where the instrument falls to the ground and injured the foot of the operator, then the operator is wearing anti-mite function This safety will greatly reduce the risk of injury when it comes to safety shoes. Because the anti-mite function is to install the inner toe cap with anti-impact force on the toe cap, the inner toe cap is placed between the shoe and the shoe, and the end of the inner toe cap is provided with a sponge strip, which can not only combine the toe cap with the vamp. Smooth, but also increase folding resistance and comfort.
Some instruments have sharp-edged production parts. If the parts of the precision instrument manufacturing workshop are messy, and the instrument is piled up, the operator may pierce the sole by some instruments when handling. This is the case in a large precision instrument factory. It will happen, when they wear safety shoes with puncture-proof function, they can work hard. Because the anti-puncture function is because the steel sheet is placed above the sole to prevent the piercing of the sole by various sharp objects, thereby preventing the foot from being injured.
With the continuous development and progress of the society, in addition to the technical aspects of the improvement of the quality of electronic products produced by precision instruments, we must also pay attention to reducing the electrostatic hazard in the environment to improve the quality of products, the application of anti-static safety shoes in the workshop and various defenses. Electrostatic materials can effectively reduce the repair rate and wear of finished products of precision electronic products, and reduce the harm of carrying low-voltage static electricity to precision electronic products during the production process.
In addition, some special environments in precision instrument factories also need to wear safety shoes with anti-smashing and anti-puncture functions to protect the safety of workers' feet. Because precision instrument factories include different production workshops, we need different workshops. We must also take comprehensive protective measures, wear safety shoes with anti-static, anti-mite and anti-puncture functions. It is able to achieve all-round labor protection, work safety is no small matter, we are doing our own safety measures, it is able to Reduce the occurrence of various accidental dangers.